Blue Clean Speedy Wash Owner's Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
En - 11
Storage
• When your power washing session has been completed.
1. Turn water supply off.
2. Disconnect the garden hose.
3. Pull the trigger on the spray gun for 30 seconds twice to
release any remaining water pressure
4. Turn off the power switch located on the front of the power
washer. Off (O)
5. Unplug the power washer.
6. Disconnect the high pressure hose from the back of the
machine and the bottom of the spray gun.
7. Remove lance and/or attachment from the spray gun.
Do not allow the power washer to run with no water owing
through it.
• Place accessories in compartments built into the power
washer. (Fig. 24)
• Store power washer and accessories in an area that does
not reach freezing temperatures. Do not store near furnace
or any sources of heat, it may dry out the pump seals.
• For easy handeling, attach the spray gun into the back of the
unit. (Fig. 25)
• DO NOT store the power washer where it is exposed to
freezing temperatures unless you use Pump Saver. It is
recommended that you use Pump Saver for storing in freez-
ing temperatures. Freezing will damage the pump unless
Pump Saver is added to the power washer. If not using or
if storing your power washer for more than one month, run
Pump Saver through it. See the section on Pump Saver for
more information.
pump Saver
Pump Saver is a product that protects and prolongs the life of the
pump. This will keep the internal parts of the pump lubricated and
protected from freezing while being stored in ALL climates. It also
assists with protection from internal corrosion. The Blue Clean part
# is: PW64511 (16oz. bottle). This can be purchased online at our
website www.arblueclean.com.
Pump Saver Instructions
Follow the previous storage instructions for your power washer. To
prevent staining, protect the surface under the power washer from
any excess uid. Wear eye protection when using this product.
1. Turn off your power washer.
2. Disconnect all hoses.
3. Shake the bottle well before connecting to the
Attach
Spray Gun
or Lance
Fig. 23
Fig. 24
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments